Guide: Alchem >> msds >> MSDS – Ferrous Sulphate Monohydrate
  MSDS – Ferrous Sulphate Monohydrate
MSDS – Ferrous Sulphate Monohydrate
Issued July 13,2007
Section1. Production information  
Product Name: Ferrous Sulphate Monohydrate  
Molecular Formula: FeSO4H2O  
Molecular weight: 169.92
CAS Number:17375-41-6
Density: 1.8987 g/ml at 25°C
Appearance: Slight grey
Specifications: powder and granular
Product Use: Included in animal feed and additive.
Section 2Reactivity data
Stability: Stable
Conditions to Avoid: Extremely high temperatures
Incompatibility (Materials to Avoid): Oxidizing agents and alkalies
Hazardous Decomposition Products: Products of sulphur oxides, sulphur dioxides and SO3
Hazardous Polymerization: Will not occur  
Section 3.Toxicological properties  
Routes of Entry: Inhalation, Skin, Ingestion, Eyes
Inhalation:  Irritation to respiratory system
Skin:  Mild irritant
Eyes:  Will cause painful irritation
IngestionIngestion of large quantities can produce GI tract disturbances, severe shock, vomiting,
liver damage, tachycardia and death.
Carcinogenicity:  Not established
Medical Conditions Generally Aggravated by Exposure:  Dermatitis, asthma, conjunctivitis, stomach
or digestive problems.
Signs and Symptoms of Exposure:  Irritation or itching, stinging of eyes, breathing problems, stomach ache, acid or sour taste.  
Section 4.Preventive measures
Personal Protective Equipment
Respiratory Protective Equipment: Use breathing protection (dust mask)
Eyes and Face: Safety goggles
Hands, Arms and Body: Gloves and long sleeved cover-alls.
Storage: Store in dry location
Normal Handling: Wear gloves, safety glasses, breathing mask, coveralls.
Work/Hygienic Practices:  Available safety showers as well as end of shift clean-up facilities.  
Steps to be Taken in Case Material is Released or Spilled:
Sweep up and repackage or place in receptacle for future disposal.
Waste Disposal Method:
Remove to properly designated landfill, or, if in solution, precipitate with alkali and filter off iron for
removal to landfill with p11 adjustments of the filtrate and discharge to sewer.
Precautions to be Taken in Handling and Storage:
Wear gloves, safety goggles, breathing mask and coveralls when handling. Stored materials should
be placed in a dry and reasonably temperatured area, preferably below 75 deg. F.
 Other Precautions: None
Section 5. First aid measures
Skin: Instantly wash with water and soap and rinse thoroughly.
 Eyes: Rinse opened eye for 15 minutes under running water.  
About Us  Contact Us  FAQ  Sitemaps  RSS  Mailto

Copyright © 2011 Alchem Co., Ltd. All rights reserved. 湘ICP备12002835号-1.